norwia as

Main_gfx

 

miniHUB

The next generation optical system

 

miniHUB is a 1 RU frame that houses pluggable cards for Optical video distribution. The miniHUB frame is a generation ahead of most frames on the market with some key improvements that make your life easier. Superbly engineered from back to front with attention to detail, the miniHUB frame is a rugged and quality system that will grow as your requirement increase. All this in a simple and cost effect way.

One miniHUB frame will provide from one simple optical link to 16 optical links within the one frame with provision to expand to a full CWDM system by adding CWDM multiplexers into the same frame and CWDM SFP's without changing the front end cards.

The miniHUB comes equipped FREE with the RCONmini controller card that enables status and advanced control functionality via web control and SNMP functionality for incorporation into larger enterprise solutions.

Click and Go card locking system is a vast improvement on previous attempts, no more losing screws, no more springs, no more metal plates and no more fumbling around. Easy to insert and easy to remove.

The miniHUB will accept 12 to 24 volts DC on a dual independent connections that can be feed independently from different types of DC sources. The choice is yours.

We know you will be pleasantly surprised with all aspects of the miniHUB including its cost effective qualities.

 

Main_gfx

 

1RU 19" FRAME - 4 CARD SLOTS + 2 PASSIVE SLOTS

miniHUB-1RU-4-2 / Standard frame


Comes complete with RCONmini controllers and one 60 watt/24V DC power supply. Frame is ready for extra power supply for dual redundancy. Included is the Click & Go card locking system and power supply cable retention bracket. Maximum capacity of 16 optical channel of point to point fiber connectivity. Easily upgradable via the two passive slots to a full 16 channel CWDM systems. System has one expansion slot for the EX-8B-422 RS422 & GPIO module.

Download specification

 

1RU 19" FRAME - 8 CARD SLOTS + 2 PASSIVE SLOTS

miniHUB-1RU-8-2 / High density frame


Comes complete with RCONmini MkII controller and one 60 watt/24V DC power supply. Frame is ready for extra power supply for dual redundancy.

The miniHUB-1RU-8-2 has a higher density with up to 8 card modules. Maximum capacity of 16 video channels and 4 Ethernet (10G) / MADI of point to point. Easily upgradable via the two passive slots to a full 18 channel CWDM systems. This frame has no Expansion card slot, but supports a backplane high speed interconnect bus between upper and lower card modules.

Download specification

 

1RU COMPACT FRAME - 4 CARD SLOTS

miniHUB-1RU-4-0 / Compact frame


Comes complete with RCONmini controllers and one 60 watt/24V DC power supply. Frame is ready for extra power supply for dual redundancy. This frame can be used for re-engineered application or smaller installations. Included is the Click & Go card locking system and power supply cable retention bracket. Maximum capacity of 16 optical channel of point to point fiber connectivity.

 

1RU COMPACT FRAME - 3 CARD SLOTS and 1 CWDM-8 MUX

miniHUB-1RU-3-1 / Compact frame

miniHUB-1RU-3-1 is a half width 1 rack unit frame that will hold up to 3 cards and 1 CWDM-8 mux. The miniHUB frame supports the RCONmini MkII (Frame Controller) which provides all external data control and referencing to the cards within. One power module is included in the frame purchase and there are facilities for a second supply to be connected if redundancy is an issue.

Download specification

 

1RU COMPACT FRAME - 2 CARD SLOTS and 1 CWDM-8

miniHUB-1RU-2-1


miniHUB-1RU-2-1 is a quarter width 1 rack unit frame that will hold up to 2 cards and 1 CWDM-8 mux. The miniHUB frame supports the RCONmini MkII (Frame Controller) which provides all external data control and referencing to the cards within. One power module is included in the frame purchase and there are facilities for a second supply to be connected if redundancy is an issue.

Download specification

 

REAR PANELS

Rear Panel selection guide


The miniHUB frame concept holds up to 8 cards and 4 rear panels. This guide will help you select the correct rear panel type for the card module(s) required for your application.

Please read our miniHUB Rear Panel Guide to select a rear panel for your card module.

Download brochure

 

POWER SUBRACK 60W, 1RU 19" FRAME

Holds up to 6 pcs 10653/11646 miniHUB power supplies


1 RU power supply frame for the 10653/11646 24volt 60W power supplies. A maximum of 6 supplies can be mounted in a sturdy frame that includes mechanisms for DC and AC power cable clamping.

Show large picture

 

POWER SUBRACK 90W, 1RU 19" FRAME

Holds up to 6 pcs 11962 miniHUB power supplies


1 RU power supply frame for the 11962 24volt 90W power supplies. A maximum of 6 supplies can be mounted in a sturdy frame that includes mechanisms for DC and AC power cable clamping.

 

1RU 19" FRAME - 10 PASSIVE SLOTS

miniHUB-1RU-0-10 / Passive optics frame


Designed specifically for any mixed variety of passive modules in the Norwia passive module range. This frame has a capacity of 10 standard modules and complements the additional need for more passive devices when using the miniHUB-1RU-4-2/miniHUB-1RU-8-2 frame in conjunction or as a standalone unit.